Acrel

ADL400-D, ADL400-U Трехфазный счетчик энергии на DIN-рейку

Счетчик энергии ADL400 на DIN-рейке оснащен установкой на DIN-рейку DIN 35 мм с ЖК-дисплеем, он может измерять электрические параметры и имеет импульсный выход энергии, связь RS485, что имеет преимущества небольшого размера, высокой точности, хорошей надежности и удобной установки.

Получить предложение Связаться с нами

Быстрая и безопасная логистика
Образец доступен

АДЛ400 CE-ADL400 EAC-ADL200 МИД-АДЛ400

ADL400-D,ADL400-U

Rated Current: AC0.1-10(80)A

Rated Voltage: AC3x230V/400V

RS485(MODBUS-RTU) Communication

12 digits LCD Display; 35mm DIN Rail Installation

Energy Accuracy:kWh Class C

MID Certificated

Functions

Technical Parameters

Display

Wiring

① Voltage Enter-wire
② Brand
③ Panel
④ Up Button
⑤ Down Button
⑥ Auxiliary function
⑦ Pulse Output
⑧ Model
⑨ Set Button
⑩ CT Enter-wire

Network

Installation

FAQ

Q：After the meter is powered on, the power or energy count is inaccurate.

A：Switch the meter display to the power (active power P, power factor λ) interface, and check whether the power display is negative or not. And whether the power factor is between 0.9-0.95, and then check whether the incoming and outgoing wires of the current signal wire are connected reversely (that is, the current The incoming wire must be the same as the incoming wire end of the instrument) and consistent with the wiring diagram on the instrument.

Q：The instrument cannot communicate with the host computer normally after power on.

A：1. The voltage value between the communication output A and B of the measuring instrument should be between +(4.4-4.5)V;

2. Check whether the communication wiring method is correctly wired in accordance with the wiring diagram requirements (that is, the communication terminal A/B of the corresponding to communication serial port A/B);

Package

MINIMUM PACKAGE